Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
2. Using the craft terminal, verify all radio ports, to be members of the L2 Radio
3. Create L2 Radio LAG port.
Note: For a detailed procedure to create L2 Radio LAG port, see
or L2 Ethernet LAG
4. Add Radio ports to L2 Radio LAG port.
Note: For a detailed procedure to add radio ports to an L2 Radio LAG port, see
Ethernet or radio ports to LAG
5. Provision PPP RF Configuration. The Remote IP Address field shows the IP
Note: For a detailed procedure to provision PPP RF Configuration, see
RF
6. From the LAG Information pane Hash drop-down menu, select hashing level:
7. From the LAG Information pane, select Enabled check box (checked).
8. Click Apply.
LAG port, are not associated with the following:
− Cross-Connection
− Port Segregation
− VLAN
− PPP RF enabled on the radio channel
− MPT-HL radio connected to a Core-E card
− MPT-HLC radio connected to a Core-E or P8ETH card
port.
address of the remote connected NE.
configuration.
(L2 or L3).
Administer L1/L2 radio and L2 Ethernet LAG
port.
ports
To create an L1/L2 Radio
To add
To administer PPP
311
Advertisement
Table of Contents
