Figure 47 Ip Static Routing Configuration Main Menu Bar Path - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
Administer network configuration
11. Close the CORE Main View window.
12. Deprovision Port#4 TMN Ethernet interface
13. Click Apply.
14. Close CORE Main View window.
To provision IP static routing in IPv4
1. From the main menu bar, select Configuration>Network Configuration>IP
Figure 47 IP Static Routing Configuration main menu bar path
138
a. For static routing, from the IP Routing Protocol drop-down menu, select
Static Routing and click apply.
b. For OSPF, perform the following:
a. From the IP Routing Protocol drop-down menu, select OSPF.
b. From the OSPF Area Number drop-down menu, select OSPF Area
Number (0 - 3).
c. Click Apply.
Select TMN Working Mode Enabled check box (unchecked).
If a static route exists on the interface, an "access denied" error message will
display. The static routes must be removed before the interface can be
deprovisioned.
Configuration> IP Static Routing Configuration. See
The IP Static Routing Configuration window opens. See
WebEML User Manual
Figure 47.
Figure 48.