Figure 489 Node A To Node C (Protected): Pass-Through Cross-Connection On Node D - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
Provision cross connections in a mixed fiber/
microwave Ring
Figure 489 Node A to Node C (protected): pass-through cross-connection on Node D
2. Provision a cross-connection between Node B and Node C
674
a. Choose the flow IDs to cross-connect from the Available VLANs list
b. Choose the Service profile: TDM2TDM or TDM2ETH
c. Choose the Clock Source, if the Service profile is TDM2ETH
d. Enter the Ring Destination MAC address: Node C Multicast MAC address
e. Enter the Ring Source MAC address: Node A Unicast MAC address
Both traffic end points belong to the fiber chain; see
WebEML User Manual
Figure 490.