10.4.11
CPU module stop error
The following explains the procedures to be taken when the CPU module stop error occurs.
(1) When a programming tool connected station is normally operating
Control
station
Selected
Normal station
No.1
station
No.2
Normal station
Normal station
No.4
No.3
Control station
Normal station
No.1
No.2
Normal
Selected
Normal station
station
station
No.3
No.4
Select the own station.
An error has occurred in the station No.4.
Select the station No.4.
Click the error details button.
The Error Factor field indicates that a CPU module stop error has occurred.
Take corrective actions according to the troubleshooting.
CHAPTER 10 TROUBLESHOOTING
563
10