Mitsubishi Electric MELSEC Q Series Reference Manual page 238

• Interlink transmission parameter setting for Module 2  Module 1
(3) Checking the interlink transmission parameters assignment image
The interlink transmission parameters assignment image of the network modules can be viewed in the network
parameters of the programming tool.
1.
Open the "MELSECNET/CC IE/Ethernet Module Configuration" window in the programming tool.
(
2.
Click the
3.
Set "Device (PLC Side)", "Device (Link Side), and "Display Magnification" to display the
assignment image.
236
Page 180, Section 6.2)
button.