Siemens SINUMERIK 840D Series Diagnostics Manual page 420

1 Alarms
100351
Definitions:
Reactions:
Remedy:
Program Continuation:
101000
Definitions:
Reactions:
Remedy:
Program Continuation:
101001
Definitions:
Reactions:
Remedy:
Program Continuation:
101002
Definitions:
Reactions:
Remedy:
Program Continuation:
101003
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
101004
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
101005
Definitions:
Reactions:
Remedy:
Program Continuation:
1-420
Display MD take-over not possible
Saving the display machine data was rejected by the NCK.
- -
-
Switch control OFF - ON.
No connection to the PLC!
The connection to the PLC cannot be made while booting, e.g. wrong PLC basic program.
- -
-
Internal
The PLC system status list cannot be read!
After the connection has been made, the system status list cannot be read.
- -
Switch controller off/on
Internal
Invalid password!
The password entered is wrong.
- -
Enter a valid password.
Internal
Password for %1 is set!
%1 = Access-level system, manufacturer, service or user.
The password for system, manufacturer, service or user was set successfully.
- -
-
Internal
Password for %1 is set!
%1 = Access-level system, manufacturer, service or user.
The password for system, manufacturer, service or user was changed successfully.
- -
-
Internal
The passwords do not match!
When the password was changed, the password entered first does not match the one
entered second.
- -
Enter a valid password.
Internal
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA) – 11.02 Edition
 Siemens AG, 2002. All rights reserved
11.02