Table of Contents
Advertisement
<Start_1>
<Spot selection>
<Weld/No weld external>
<Reset fault>
<Fault reset with WC>
<Fault reset with reweld>
<Proportional valve selection>
<Weld complete contact WC>
É É
(Start/duration programmable before end of HOLD)
[Pre-squeeze time]
[Squeeze time]
[1st Weld time]
[1st Cool time]
[2nd Weld time]
[3rd Cool time]
[3rd Weld time]
[Hold time]
Figure 30: Example of normal schedule (sequence), seam
Advertisement
Table of Contents
