Figure 3-4 Identification Number - Siemens Maxum II Manual

System Functions
3.4 Data Communication
Module Addressing
The Maxum II modules located in the electronic compartment have their own physical address
and communicate via the I
is contained in the SYSCON database and identifies modules by their location. Each DPM is
associated with a software SNE module that appears in the list as a separate device.
Identification Number
All modules within the Maxum II electronic compartment have a unique identification number
as related to the software SNE module which controls them. The identification relationship
between the SNE and the modules it controls is referred to as the SNE ID String.
11
Figure 3-4
Address information is located in the analyzer local I/O Table. The I/O points are identified by
module type, mounting location within the electronic compartment and channel number. This
allows module addressing from either the SYSCON database, SNE Tables or from Advance
Database.
18
2
. 129
: 1 - 1 . 1 - 1 . 1
Identification Number
C Internal Bus, shown in the diagram below. Address information
Channel Number
Channel Type
PIC Index
Module Number (Location ID)
Sub Module Type & Description
Module Type
SNE ID
Maxum edition II Analyzer General Maintenance
Manual, August 2018, A5E42019842001