Functions; Figure 3-1 Example Applet - Siemens Maxum II Manual

System Functions

3.2 Functions

Figure 3-1
3.2 Functions
Overview
This section provides an operational overview of the real-time functional tasks of the Maxum
II.
● Startup Tasks
– Applying Power
– Valid Database
– Oven Temperature
– Cycle Control Flag
● Timed Event Scheduling
– Time-Of-Day Clock
– Schedule of Events • Frequency Events
Startup Tasks
On start-up, when primary AC power is applied to the analyzer, the analyzer first processes
whatever electronic self-tests and diagnostics are required such as PROM, RAM, A/D, and
communication ports. This processing occurs within 5 seconds.
System-related initial messages are generated and output to the network ports. Appropriate
initial messages are then displayed on the Maintenance Panel and completed within 20 to 25
seconds. If the analyzer cycle clock is in RUN or CAL mode, an appropriate alarm may be
generated during this internal test and the following startup period.
10
Example Applet
● Analysis Cycle Clock
– Accessing System Controller
– Analysis Cycle Clock
– SYSCON Cycle Clock
– Valve Events
● Manual Operations via User Interface
Maxum edition II Analyzer General Maintenance
Manual, August 2018, A5E42019842001