Data Communication Between Nck And Mmc; Loading Data - Siemens SINUMERIK 840C Operator's Manual

6 Programming
6.2.5

Data communication between NCK and MMC

6.2.5.1

Loading data

Loading workpieces
© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
The data manager can also be used to exchange NCK-compatible data between
the MMC and the NCK memory.
Proceed as follows to load a complete workpiece:
• Select the right-hand combo box with the EDIT key.
• Open the combo box with the RIGHT ARROW key and use the vertical
ARROW keys to position the selection bar on "NC Program Memory".
• Press the INPUT key to enter the selected item in the combo box.
• Select the left-hand combo box with the EDIT key.
• Open the combo box with the RIGHT ARROW key and use the vertical
ARROW keys to position the selection bar on the desired workpiece.
Fig. 6-13 Loading workpieces
• Press the INPUT key to enter the workpiece in the combo box.
• Press the COPY softkey.
The selected workpiece is loaded into the NCK program memory, i.e. the files
of the workpiece are transferred according to the commands in the job list. The
SELECT instructions in the job list are not processed.
6FC5198-6AA60-0BP1
01.99
6-25