Setting Data; Working Area Limitation; General Setting Data - Siemens SINUMERIK 840C Operator's Manual

5 Parameters
5.3.6

Setting data

Settin g
da ta
Axis/spi General
.
nd. con- data
verter
Axis/ Cycle
spind. data
conv.
5.3.6.1

Working area limitation

W o rking
area lim it.
5.3.6.2

General setting data

G en era l
da ta
Dry run feedrate (SD0)
5-18
With this softkey you select the input menus for the setting data.
The following menu appears in the softkey bar:
Spindle Scale
data
Press the ETC key to expand this softkey bar. The following softkeys are then
displayed.
Gearbox Travel to
interpol. fixed stop
With this softkey, you select the input menu for the working area limitation.
You can enter the working area limitation setting data in the display.
Using the working area limitation in all operating modes, the traversing ranges
can be limited in addition to the software limit switches. The axes are displayed
for a specific mode group.
When switching over from the METRIC to the INCH input system (and vice
versa), the values of the working area limitation are adjusted in the respective
measuring system only if the maximum possible value is exceeded. If the value
of the working area limitation is possible in the current measuring system, no
adjustment is made.
With this softkey, you select the input menu for the general setting data. You
can enter the following setting data for the GENERAL DATA display:
• Dry run feedrate
• Variable increment weighting
• Smoothing constant for thread
The dry run feedrate (units/min) entered here is effective if the dry run feedrate
has been activated through program modification. All blocks for which a
feedrate has been programmed are now traversed with the "Dry run
feedrate" specified via the setting data instead of the programmed feedrate (but
please observe the maximum feedrates defined by machine data).
6FC5198-6AA60-0BP1
Setting Protection
Bits zone
Switch over
Inch/Metric
© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
01.99
Position
meas.
sign.
Search