Rename Program; Delete Program - Siemens SINUMERIK 840C Operator's Manual

01.99
6.3.7.3

Rename program

Operating
sequence
R en am e
6.3.7.4

Delete program

Operating
sequence
D elete
6-60
Select a part program (MPF/SPF) with the cursor.
Now enter the new program number (e.g. MPF222) and press the softkey
RENAME. The program is displayed under a new name.
If you press the softkey RENAME before entering the program number, the
message "Please enter new name" appears..
Do this and then press the softkey RENAME again.
Deleting with the data selector:
Select the program that you wish to delete with the cursor.
Fig. 6-37 Deleting NCK programs
Press the softkey DELETE.
The following message appears: "Delete data?"
If you press the softkey DELETE again the program that you have selected is
deleted.
6FC5198-6AA60-0BP1 © Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
6 Programming