Axis-Specific G Functions - Siemens SINUMERIK 840C Operator's Manual

01.99
4.3.9

Axis-specific G functions

© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
This is purely a display function. The "axis-specific" G functions are displayed
instead of the "program pointers".
The endlessly turning rotary axis is programmed with these G functions. This
function is relevant for hobbing.
Order number option
The endlessly turning rotary axis is an option.
The G functions
• G27
Handwheel override
• G105
Endless rotation OFF
• G103
Endless rotation ON clockwise
• G104
Endless rotation ON counter-clockwise
• G119
Oriented STOP
• G94
Simultaneous feedrate F in mm/inch/degrees per min.
• G195
Simultaneous feedrate F in mm/inch/degrees per revolution
with reference to the speed/feedrate setpoint of the defined
spindle or rotary axis.
• G295
Simultaneous feedrate F in mm/inch/degrees per revolution
with reference to the speed/feedrate actual value of the
defined spindle or rotary axis.
• G98
Simultaneous feedrate F in revolutions per min.
Machine manufacturer
The function must be configured by the machine-tool manufacturer. Please
therefore consult the machine manufacturer's documentation.
6FC5198-6AA60-0BP1
4 Machine
4-83