Table of Contents
Advertisement
Bosch Motorsport
5.
Click 'Next' when done.
The second part of the 'Sensitivity/Offset Wizard' opens.
Physical
(channel)
value
6.
Click 'Next' when done.
The third part of the 'Characteristic Curve Wizard' opens.
Physical
limits of
channel
NOTICE
Working with automatically created measurement sheets is ex-
plained in chapter 'Setting up an online measurement'.
7.
Click 'Finish' when done.
8.
Enter channel name and description.
Data Logger C 60
Analog and Frequency Inputs | 10
Select physical unit.
Choose 'Ohm' to enter
datasheet values directly.
Enter
resistance/temperature
pairs from sensor datasheet
here (The 3.01 kOhm pullup-
resistor is automatically
taken into account)
Enter physical limits
of the channel
Choose data type of the
measurement variable
This sensor does not
need offset calibration
Enter name to
automatically create a new
measurement sheet
59 / 108
Advertisement
Table of Contents
