Table of Contents
Advertisement
10 | Analog and Frequency Inputs
44 / 108
The internal pullup-resistor is used to get a 5 V signal at the analog channel of the C
60.
It allows you to use a push-button.
The fixed value of the internal pullup-resistor is 3010 ohm. If using an additional ex-
ternal pullup-resistor, set up the overall resistance.
6.
Click 'Next' when done. The second part of the 'Multipoint Adjustment Wizard' opens.
7.
Click 'Next' when done. The third part of the 'Multipoint Adjustment Wizard' opens.
Physical
limits of
channel
NOTICE
Working with automatically created measurement sheet is explained
in chapter 'Setting up an online measurement'.
Data Logger C 60
Enter physical
limits of the sensor
Choose data type of
the measurement
variable
Enable additonal
online calibration
Enter name to
automatically create a new
measurement sheet
Bosch Motorsport
Advertisement
Table of Contents
