Chapter 5: Maintenance And Troubleshooting - Accu-Chek Performa User Manual

Chapter 5: Maintenance and Troubleshooting

Meter Maintenance
The meter automatically tests its own systems every time you turn it on and lets you know if something is
wrong. See Chapter 5, Display and Error Messages.
If you drop the meter or think the results are not accurate, contact Roche.
Changing the Battery
1
Open the battery door on Insert the new battery
the back of the meter by with the (+) side facing
pushing the tab in the up.
direction of the arrow and
pulling the door up.
Remove the old battery.
NOTE
• The meter uses one 3-volt lithium battery, coin cell type CR2032. This type of battery can be found in
many stores. It is a good idea to have a spare battery available.
• All results remain saved in the memory.
53352_07054327001_02_EN.indb 31
Maintenance and Troubleshooting
2 3
Put the battery door back
in place and snap it
closed.
Version RO
5
31
2/27/15 1:50 PM