Backing Up Data (Memory Card) - Siemens G120P Technical Manual

6.7 Backing up data (memory card)

Siemens
Building Technologies
Standard MMC cards or SD cards up to 2GB are supported. Siemens memory
cards provide other functions.
NOTICE
Risk of data loss
If the memory card already contains the settings of another variable speed drive,
the device adopts those settings. Data may be lost.
● Use an empty memory card.
 You require an empty memory card for the following procedure.
1. Switch off the power supply of the variable speed drive.
2. If the Control Unit is connected to a computer via a USB cable, the card is
identified as a bulk storage device and its use is blocked. Remove the USB
cable which has been inserted.
3. Wait until the variable speed drive is in a completely no-voltage condition and
no LED on the Control Unit is lit.
4. Insert the empty memory card into the card slot on the Control Unit.
5. Switch on the operating voltage of the drive.
 After the variable speed drive has been switched on, it copies the settings
to the memory card.
Commissioning
Backing up data (memory card)
A5E36496664A_d
6
65 | 98
2016-03-17