Country Screen - Toshiba IP4100 Installation Manual

BASE STATION CONFIGURATION
Table 3-18 Time Settings Parameters
Parameter
Time Server
Refresh Time (h)
Time Zone
Daylight Saving Time
(DST)
DST Fixed By Day
DST Start Month
DST Start Date
DST Start Time
DST Start Day of Week
DST Start Day of Week
Last in Month
DST Stop Month
DST Stop Date
DST Stop Time
DST Stop Day of Week
DST Stop Day of Week
Last in Month

Country Screen

3-14
Enter the IP address or URL of the server that distributes reference clock
information; this information is used by all system components.
Enter the number of hours (positive integer) between time server refreshes.
Select the number of hours the local time zone differs from GMT/UTC time.
Select whether the time server adjusts one hour forward for daylight savings
time (Enable), does not adjust for daylight savings time (Disable), or
automatically turns daylight savings time on and off throughout the year
(Automatic).
If you set daylight saving time to Automatic, select the parameters the server
should use to turn it on and off:
– Use Month and day of week: the system uses the values in the
Month, Time, Day of week, and Last Week of Month fields to start
and stop daylight savings time
– Use Date: the system uses the values in the Month, Time, and Date
fields to start and stop daylight savings time
Select the month daylight savings time begins (start).
(if Use Date is selected) Enter the day of the month (1 through 31) on which
daylight savings time begins.
Enter the hour (1 through 24) in which daylight savings time begins.
(if Use Month and Day of week is selected) Select the day of the week on
which daylight savings time begins.
(if Use Month and Day of week is selected) Select which week during the
month daylight savings time should begin.
Select the month daylight savings time ends.
(if Use Date is selected) Enter the day of the month (1 through 31) on which
daylight savings time ends.
Enter the hour (1 through 24) in which daylight savings time ends.
(if Use Month and Day of week is selected) Select the day of the week on
which daylight savings time ends.
(if Use Month and Day of week is selected) Select which week during the
month daylight savings time should end.
Select the country that best represents the tones and emergency dialing
you want to use for the system. Reboot the base station to activate the
new setting.
Description
IP4100 Install Sept., 2013
Country Screen