Management Screen - Toshiba IP4100 Installation Manual

BASE STATION CONFIGURATION
Table 3-12 SIP/RTP Settings Parameters
Parameter
Local SIP port
SIP ToS/QoS
RTP port
RTP port range
RTP ToS/QoS
Figure 3-3 Management Screen
3-10
Enter the port number the server should use for the first user
agent (UA) instance. Successive ports will be automatically
assigned for additional UA instances. The default port
number is 5060.
Enter the Type of Service or Quality of Service priority code
for SIP call control traffic. The default value is 0x68 (104 in
decimal notation).
Enter the number of the first RTP port to use. Successive
ports will be automatically assigned up to the number
entered below. The default port is 50004.
Enter the number of ports that can be used for RTP audio
streaming (the default is 40).
Enter the Type of Service or Quality of Service priority code
for RTP traffic; the default is 0xB8.
Description
IP4100 Install Sept., 2013
Network Screen