Securing And Aligning The Furniture Door - Miele F 1471 Vi Operating And Installation Instructions

Securing and aligning the
furniture door
^ Insert the angle trim as far as it will
go into the spaces in the frame, as
shown.
^ Open the appliance door and hang
the furniture front on its frame onto
the threaded bolts, as shown n.
^ Press the angle trim on both sides
into the white plastic frame, and
screw them down securely. Spare
screws can be found in the plastic
bag marked "E".
^ Screw the nuts o loosely onto the
threaded bolts, but do not tighten yet.
^ Close the door and check the
distance between the door and
neighbouring furniture doors.
^ Align the height of the appliance door
by sliding it over the threaded bolts
n.
^ Align the depth of the appliance door
via the gaps in the angle trim . Then
screw the angle trim into position.
^ Now screw on the top nuts o. The
door is now fixed.
Installation
75