Alarms - Miele F 1471 Vi Operating And Installation Instructions

Alarms

Your appliance has been fitted with a
warning system which ensures that the
temperature in the appliance cannot
rise unnoticed and to avoid energy
being wasted if the door is left open.
Activating the alarm system
The alarm system is always active. It
does not have to be switched on
manually.
Temperature alarm
If the temperature in the appliance gets
too warm, the alarm sensor will flash in
the control panel.
An audible alarm will also sound.
The temperature display will show the
highest temperature that was reached
during the time the temperature in the
freezer rose.
The alarm will sound and the relevant
symbol will flash, for example:
– if the freezer door has been left open
for a while, e.g. in order to load,
rearrange or take food out.
– when freezing large amounts of food
at once.
– in the event of a power cut.
The alarm will stop and the "Alarm off"
sensor in the display will go out again
as soon as the temperature has
dropped down to the correct level
again.
22
Switching the temperature
alarm off early
If the noise disturbs you, you can
switch the alarm off early if you wish.
^ Touch the "Alarm off" sensor.
The alarm will stop.
The "Alarm off" sensor will continue to
be lit up until the temperature has
dropped down to the correct level
again.
However, if the temperature in the
freezer remains above -18 °C for a
long time, check that the frozen food
has not started to defrost. If it has,
check that the food is safe to use
and if it is, then use it as soon as
possible.