Miele F 1471 Vi Operating And Installation Instructions page 44

Problem solving guide
. . . "_F" and "121" appear alternately
in the temperature display.
There is no water coming into the ice
cube maker.
^ Check whether the appliance is
correctly connected to the mains
water supply.
^ Check whether the water inlet is
open.
. . . a fault message with "_F" appears
in the temperature display.
There is a fault. Call Miele.
. . . the interior lighting is not
working.
Has the appliance door been left open
for too long? To avoid overheating, the
lighting switches itself off automatically
after approx. 5 minutes if the door is left
open. It will come on again after it has
cooled down sufficiently.
If the lighting does not come on when
the door is opened briefly, then the
lighting is defective.
^ Switch the appliance off by pressing
the On/Off rocker switch.
^ Disconnect the appliance from the
mains. Switch off at the wall and
withdraw the plug from the socket, or
disconnect the mains fuse or remove
the screw-out fuse in countries where
this is applicable.
44
Top lighting:
^ Hold the lamp cover at the front with
both hands and push it back.
^ Then lift the lamp cover forwards to
remove.
Do not touch halogen lamps with
your bare fingers.
Use a soft cloth when changing a
halogen lamp.
^ Pull the defective halogen lamp out.
^ Fit the new lamp into the holder.
The following type of halogen lamp is
required:
20 W/12 V/ GY 6.35 cap.
^ Engage the lamp cover at the back,
then pull it forward and click it into
place at the front.