Weight Of The Furniture Door Front; Building Into A Peninsular Run; Building-In At The End Of A Run Of Units - Miele F 1471 Vi Operating And Installation Instructions

Stainless steel fronts
Stainless steel fronts and plinth grilles
with a stainless steel look are available
from Miele.
Weight of the furniture door
front
Before fitting a furniture door front,
ensure that the weight of the door does
not exceed the maximum permitted.
Appliance
F 1471 Vi
Fitting a door which is heavier than
the maximum permitted could
damage the hinges.
Max. weight of
door
front in kg
65

Building into a peninsular run

When built into a peninsular run, the
rear of the building-in niche must be
fitted with a kitchen furniture panel.
Building-in at the end of a run
of units
If one side of the appliance is visible, a
side panel is required.
The side panel must be fixed to the
wall, the floor and any furniture/units
above before the appliance is placed in
the niche.
The size of the side panel must match
that of the furniture panel opposite.
Installation
63