Card Name And Function - Philips SOPHO 2000 IPS User Manual

CARD NAME AND FUNCTION

The table below shows the circuit card name and function for ISDN.
FUNCTIONAL
CARD NAME
PN-BRTA BRT
PN-2BRTC BRT
PN-2BRTK BRT
[For UK]
PN-4BRTA-A BRT
PN-24DTA-C DTI
PN-30DTC-C DTI
PN-2ILCA ILC
PN-2ILCC ILC
PN-24PRTA PRT
PN-30PRTA PRT
PN-DTA PRT
PN-DTB PRT
ISDN Card Name and Function
NAME
1-line Basic Rate (2B + D) Interface Trunk Card
Accommodates one 2-channel PCM digital lines.
2-line Basic Rate (2B + D) Interface Trunk Card
Accommodates two 2-channel PCM digital lines.
2-line Basic Rate (2B + D) Interface Trunk Card
Accommodates two 2-channel PCM digital lines.
4-line Basic Rate (2B + D) Interface Trunk Card
Accommodates four 2-channel PCM digital lines.
T1 Digital Trunk Interface (1.5 Mbps) Card
Accommodates 24-channel PCM digital lines.
E1 Digital Trunk Interface (2 Mbps) Card
Accommodates 30-channel PCM digital lines.
2-line ISDN Line Circuit Card
Provides a physical interface to ISDN Terminals.
2-line ISDN Line Circuit Card
Provides a physical interface to ISDN Terminals.
This card does not require PN-SC03-B (ICH) card.
ISDN Primary Rate (23B + D) Interface Card
Provided a built-in D-channel Handler (DCH).
ISDN Primary Rate (30B + D) Interface Card
Provides a built-in D-channel Handler (DCH).
ISDN Primary Rate (23B + D/30B + D) Interface Card
Provided a built-in D-channel Handler (DCH).
ISDN Primary Rate (23B + D/30B + D) Interface Card
Provides a built-in D-channel Handler (DCH).
CHAPTER 1 GENERAL INFORMATION
FUNCTION
– 28 –

CARD NAME AND FUNCTION

Continued on next page
NWA-008852-001 Rev.5.0
98ch1001.fm
JULY/13/2007