Table of Contents
Advertisement
(3)
Direct In Termination (DIT)
When the ISDN line station number is assigned as the destination of DIT, the call from ISDN
terminates all ISDN Terminals on the same bus (2B + D) simultaneously.
ISDN Terminal
Station No. 407
In addition to the programming of "Point-to-Multipoint Connection"
following programming.
START
CM30
Assign the data for DIT to the trunk numbers
assigned by CM07.
Assign the ISDN Terminal station number to
be terminated by Direct In Termination.
END
ISDN Line
Station No. 7880
ISDN Terminal
Station No. 400
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
ISDN TERMINAL DATA PROGRAMMING
PBX
ILC
•
Y=02 Day Mode
•
Y=03 Night Mode
•
Y=40 Mode A
•
Y=41 Mode B
(1)
000-255: Trunk No. assigned by CM07
(2)
04: Direct-In Termination
•
Y=04 Day Mode
•
Y=05 Night Mode
•
Y=42 Mode A
•
Y=43 Mode B
(1)
000-255: Trunk No. assigned by CM07
(2)
X-XXXXXXXX: ISDN Terminal Station
– 180 –
TRK
ISDN
214-555-7880
(Office No.)
Page
172, do the
DATA
Y=01/02
Y=01/02
No.
NWA-008852-001 Rev.5.0
NOVEMBER/15/2006
98ch3002.fm
Advertisement
Table of Contents
