OfficeServ 7200
TECHNICAL MANUAL
Checking Slots
The WIM board can only be installed in slot 1 of the main cabinet or slot 1 of the
expansion cabinet, and the TEPRI/TEPRIa can only be installed on slots 3, 4 and 5 of
the main cabinet and slot 3 of the expansion cabinet.
Ground Connector
Back panel components:
Parts
q Power switch
w Power connector between a basic
cabinet and an extension cabinet
e AC Power Cord "IN"
r AC LED
t DC LED
y Battery Backup connector
Figure 3.2 Back Panel Configuration
q
w
e
r
t
Figure 3.2 Back Panel Components
Table 3.2 Back Panel Parts
Switches the power of OfficeServ 7200 on/off.
Extends 110V AC power from basic cabinet to expansion
cabinet.
Connects to a grounded electrical outlet on a dedicated
circuit.
Is lit for the AC input power.
Is lit for the DC output power (internal DC voltage)
Connects an external battery source "48V DC only"
3.2
Home Page
PART 3 MAY 2010
y
Description
Table of Contents
INSTALLATION