OfficeServ 7200
TECHNICAL MANUAL
• WIM board-P1, P2, P3, and P4 ports
• PLIM/PLIM2 board-all ports (P1 through P16)
• GSIMT P1~P12
• GPLIMT P1~P12
• 4DSL board-Up Link port(LAN)
• MCP/MP20, MGI, MGI16 and SVMi-20E boards-LAN port
7.1.7 Connecting a Wireless LAN Access Point
Wireless LAN service offered by the OfficeServ 7200 system requires the following equipment:
• 4WLI board: A board installed in the OfficeServ 7200 system for WBS24 connection
• WBS24: Wireless LAN Access Point (AP)
• WIP-5000M: Wireless LAN IP phone
Item
Number of the 4WLI boards
Maximum number of WBS24s
Maximum number of users
Number of simultaneous users
References
For information on how to install and use WBS24 and WIP-5000M, refer to OfficeServ
Wireless Documentation.
Connect the 4WLI board and WBS24 by using two 0.64 mm twisted cables (RJ-45 Ethernet
cable, 600 m/1968 ft maximum distance) or two 0.40 mm twisted cables (RJ-45 Ethernet
cable, 400 m/1312 ft maximum distance).
Table 7.2 Specification for Wireless LAN Connection
Main Cabinet
3
12
120
48
7.5
Home Page
OfficeServ 7200 System
Main and Expansion
Cabinets
12
120
48
Table of Contents
INSTALLATION
PART 7 MAY 2010
3