OfficeServ 7200
TECHNICAL MANUAL
1.3 POWER CONDITIONS
The power supply board of the OfficeServ 7200 system receives AC input power or battery
power, and supplies -48V, -5V, +5V, +3.3V, +12V, and -56V to the system cabinet.
The rating is as follows:
• RATING: AC 110-120V; 6A; 50/60Hz or DC 48V 3A
Power Supply Unit(PSU)
PSU
1.4 UNPACKING AND INSPECTION
The OfficeServ 7200 can be configured as a single cabinet or dual cabinet system.
All OfficeServ 7200 cabinets are identical when shipped from Samsung. After unpacking the
cabinet(s), inspect for signs of physical damage. If any damage is detected, do not attempt to
install the system. Contact Samsung Telecommunications America Technical Support
Department.
Check to see that each cabinet carton includes the following:
• OfficeServ 7200 cabinet
• AC Power Cable
• Rack Mount Side Flange Brackets (2)
• Rack Mount Cross Bar (1)
• Screw Pack
• Battery Cable Assembly
• Blanking Plates (3)
Table 1.1 Power Specifications
Input power
AC 110V
DC 48V
(DC 48V for battery backup ONLY)
Output power
- DC 48V, 2.2A
- DC +5V, 8.0A
- DC -5V, 1.0A
- DC +3.3V, 10A
- DC +12V, 0.4A
- DC -56V, 0.4A (for battery backup)
1.4
Home Page
INSTALLATION
PART 1 MAY 2010
Specification
Table of Contents