Chapter 5. Key Telephone Features
•
Exclusive Hold
•
Broker's Hold
•
Station Call Park
System Hold
You can place either an outside or intercom call on System Hold. You can retrieve a call placed on
System Hold from any extension that has a line appearance for the held call.
Operation
To place a call on System Hold:
1. While on a call, press the HOLD key.
To retrieve a call placed on System Hold from the extension that placed it there:
1. Press the line key that is flashing green or press the HOLD
key if a non-appearing CO call.
To retrieve a call placed on System Hold from an extension other than the one that put
it there:
1. Press the line key that is flashing red.
To retrieve a held call on a specific trunk:
1. Lift the handset or press the ON/OFF key.
2. Enter the Specified Trunk Answer code (default = *0).
3. Enter the trunk number.
Hardware Requirements
•
N/A
Related Programming
•
FF1-0-01: Floating Hold on HOLD Key
134
Action
Action
Action
Action
DBS 576 (USA), issued January 1999
Section 700 - Operation
Result
• Intercom dial tone
• Hold CO XXX displays (where XXX
= outside line number)
Result
CO XXX displays (where XXX = outside
line number)
Result
CO XXX displays (where XXX = outside
line number)
Result
Intercom dial tone
Enter TRK # displays
576-20-700