Panasonic DBS576 Section 700 Technical Manual page 116

Chapter 4. User Maintenance
7. Enter the Absence Message (up to 15 characters):
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
83.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 84.)
Note: Press the FLASH key to clear any existing data.
8. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-display phone on page 83.
• See Example 2. Small-display phone on page 84.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
9. Repeat steps 7-8 as many times as necessary to enter the
desired Text Message.
Note: Press the FLASH key to clear the entire entry.
10. Press the HOLD key to store the entry.
11. To set additional Absence Messages, press the volume up
or down key or press the HOLD key to move to the desired
Absence Message.
12. Repeat steps 7-11 until all Send Text Messages are entered.
13. Press the AUTO key to exit the entry mode.
14. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A
116
Action
DBS 576 (USA), issued January 1999
Section 700 - Operation
Result
Next message number displays
Desired Absence Message displays
Enter Msg # displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
576-20-700