Setting The Date And Time; Automatically Setting The Time - HP 800 User Manual

NOTE:
TIP:
– Negotiable – Using this scheme, the client and the proxy server
negotiate a scheme for authentication. Ultimately, either the basic
or digest scheme will be used.
b. Enter the ID of a user account on the proxy server in the User name
text box.
c. Enter the password of the user account specified in the User name text
box in the Password text box.
d. Re-enter the password.
5. Click ok.

Setting the Date and Time

The Date and time area allows you to configure the following:
Allow automatic synchronization with an NTP server
■
Manually set date and time for the MS
■
■ Edit date and time:
• Set time zone
• Set date
• Set time
Date and time settings are applied to the MS; however, you can set the time
zone for each ES.

Automatically Setting the Time

To automatically set the time:
Home window>>System configuration>>Management server
1. Select Automatically receive NTP updates from and enter one or more
Network Time Protocol (NTP) servers, separated by commas. The NTP
protocol allows NAC 800 to synchronize its date and time with other
endpoints on your network. For example, time.nist.gov.
2. Click ok.
Use of NTP is strongly recommended.
System Configuration
Management Server
3-25