HP 800 User Manual page 225

IP: <IP of the NAC 800 Server>
External port number: 139
Select TCP.
9. Click OK.
10. Click Add.
11. In the Service Settings window, enter the following information:
Description: NAC 800 Server 445
IP: <IP of the NAC 800 Server>
External port number: 445
Select TCP.
12. Make sure all four rules are selected.
13. Click OK.
The following method is an alternate method:
To configure the Windows XP Professional firewall to allow the RPC service
to connect:
Windows endpoint>>Start>>Settings>>Control Panel>>Windows
Firewall>>Exceptions tab
Select File and Print Sharing. (Verify that the check box is also selected.)
1.
Click Edit.
2.
3. Verify that the check boxes for all four ports are selected.
Select TCP 139.
4.
5. Click Change Scope.
Select Custom List.
6.
7. Enter the NAC 800 Server IP address and the 255.255.255.0 mask.
Click OK.
8.
Select UDP 137.
9.
10. Click Change Scope.
11. Select Custom List.
12. Enter the NAC 800 Server IP address and the 255.255.255.0 mask.
13. Click OK.
End-user Access
Windows Endpoint Settings
5-19