Ongoing Maintenance; Failover Process - HP 800 User Manual

NOTE:
Only an administrative user needs to be created. Other UI users are migrated
as part of the backup and restore process. Be sure to keep this UI login
information safe, as it is Needed to transition MS services to the standby MS.

Ongoing Maintenance

Certain considerations must be noted regarding the ongoing maintenance of
your system in the recovery process for an MS:
■ As part of an ongoing maintenance plan or during backup, check the
status of the NAC-testscripts RPM by entering the following from the
command line:
rpm -q NAC-testscripts
■ If changes are made to the license without an internet connection
(such as increasing the number of ESs or endpoints), you will need
to make changes to the standby license as well. For a license without
an internet connection you will need to contact ProCurve Networking
by HP at or for a package to update the license key. In normal
environments however, the license key will update automatically.
Rule updates must be applied to both the primary and standby MS (so
■
they have the same version)
■ NAC 800 upgrades must be applied to both the primary and standby
MS
Regular backups need to be taken of the primary MS, and stored in a
■
safe location

Failover process

Once a standby MS is established for MS recovery and all system requirements
and ongoing maintenance issues are addressed, begin the MS recovery as
follows:
To migrate MS duties to the standby MS:
1. Shutdown the primary MS server by entering the following from the
command line:
shutdown -hy 0
MS Disaster Recovery
Overview
F-3