Hp Procurve Switch - HP 800 User Manual

System Configuration
Quarantining, 802.1X
TIP:
3-78
10. Enter the password with which to enter enable mode.
11. Re-enter the enable mode password.
12. Enter the Reconnect idle time. This is the amount of time in milliseconds
that a Telnet/SSH console can remain idle or unused before it is reset.
13. Select the Show scripts plus symbol to show the following scripts:
Initialization script – The expect script used to log into the console and
•
enter enable mode.
Re-authentication script – The expect script used to perform endpoint
•
re-authentication.
• Exit script – The expect script used to exit the console.
14. Click ok.
Click revert to defaults to restore the default settings.

HP ProCurve Switch

To add an HP ProCurve switch:
Home window>>System configuration>>Quarantining>>802.1X Quarantine
method radio button>>Add an 802.1X device