Activex Test Method; Ports Used For Testing; Windows Vista Settings - HP 800 User Manual

End-user Access
Windows Endpoint Settings
TIP:
TIP:
5-20
14. Select TCP 445.
15. Click Change Scope.
16. Verify that the My network (subnet) only radio button is selected.
17. Click OK.
18. Select UDP 138.
19. Click Change Scope.
20. Verify that the My network (subnet) only radio button is selected.
21. Click OK.
22. Click OK.
23. Click OK.
You can add more security by specifying the endpoints allowed for File and
Print Sharing as follows:
Select File and Print Sharing, Click Edit, Select Change Scope, and select
either My Network or Custom List (and then specify the endpoints).

ActiveX Test Method

Ports Used for Testing

You might need to configure some firewalls and routers to allow NAC 800 to
access port 1500 for ActiveX testing.
See "Ports used in NAC 800" on page E-1 for a complete description of the
ports used in NAC 800.

Windows Vista Settings

All Windows Vista endpoints must have administrator permissions in order
for the ActiveX component to install successfully. If the end-user is not logged
in to the endpoint with administrator permissions, the following occurs:
■ If User Account Control (UAC) is enabled, Windows Vista prompts
you for credentials. After the credentials are entered, the ActiveX
component installs.
If UAC is disabled, the ActiveX component installation fails without
■
notifying the end-user.