Resource Programming; Smdr Incoming / Outgoing Call Log Printout - Panasonic KX-TD816 Installation Manual

4.9

Resource Programming

SMDR Incoming / Outgoing Call Log Printout

Description
Selection
Default
Programming
Conditions
Feature References
Used to determine which calls will produce an SMDR printout.
• Outgoing calls: All (all calls) / Toll (toll calls only) /
Off (no printing)
• Incoming calls: On (all calls) / Off (no printing)
Outgoing calls – All; Incoming calls – On
1. Enter 800.
Display: Duration Log
2. Press NEXT to program outgoing calls.
Display: Outgoing:All
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press NEXT to program incoming calls.
Display: Incoming:On
6. Keep pressing SELECT until the desired selection is
displayed.
7. Press STORE.
8. Press END.
• It is necessary to connect a printer to the EIA (RS-232C) port provided
on the system.
• If "Toll" is selected, the system will print out all the calls starting from
the numbers stored in programs [301]–[305] "TRS Denied Code Entry
for Levels 2 through 6."
Section 3, Features,
Station Message Detail Recording (SMDR)
System Programming
800
4-111