Panasonic KX-TD816 Installation Manual page 102

2.4.9 System Connection*
Notes
Programming References
Feature References
2-70 Installation
8. Open the ROM Cover in the Slave System and set
the Master/Slave Switch on the CPU Card to
"Slave" position.
9. Turn the power on.
• System Connection is completed about one minute later after the power
is turned on.
• To turn the power on for the first time, refer to Section 2.6 "Starting the
System for the First Time."
No programming required.
Section 3, Features,
System Connection
REMOTE
DISA
*: Available for KX-TD816 only.