Station Hunting Type - Panasonic KX-TD816 Installation Manual

4.3 System Programming
Description
Selection
Default
Programming
Conditions
Feature References

Station Hunting Type

Used to enable or disable hunting and set the Station Hunting type
for each extension group. There are four Station Hunting types
available: Circular, Termination, Voice Mail (VM), and Automated
Attendant (AA). If circular hunting is assigned for a group, all the
extensions in the group are hunted until an idle one is found. If
termination hunting is assigned, hunting stops at the extension
which has the largest jack number in the group. If VM hunting is
assigned, all the VM ports of an extension group are hunted until
an idle one is found to permit Voice Mail Service. If AA hunting is
assigned, all the AA ports of an extension group are hunted until an
idle one is found to permit AA Service.
• Extension group number: 1 through 8,
• Disable (no hunting) / Terminate (termination) / Circular / VM
(voice mail) / AA (automated attendant)
All extension groups – Disable
1. Enter 106.
Display: Call Hunting
2. Press NEXT.
Display: EXT GRP NO?–>
3. Enter an extension group number.
To enter extension group number 1, you can also press NEXT.
Display example: Group1: Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another extension group, press NEXT or PREV,
or SELECT and the desired extension group number.
7. Repeat steps 4 through 6.
8. Press END.
• Program [602] "Extension Group Assignment" is used to assign the
extension group members.
• The system supports a maximum of eight jacks (16 jacks during System
Connection for KX-TD1232) for connection to a Voice Processing
System as VM or AA ports.
Section 3, Features,
Station Hunting
( =all extension
groups)
Voice Mail Integration
System Programming
106
4-37