214
Description
Selection
Default
Programming
Conditions
Feature References
4-64
System Programming
4.4
DISA Prolong Time*
Sets the maximum allowable prolonged time for a DISA CO-to-CO
call. A CO-to-CO call is initially limited by the "CO-to-CO Call
Duration Time" (Program [206]). However, the DISA caller can
prolong the call after hearing the warning tones by pressing any key
(except the
key). This parameter, the "DISA Prolong Time,"
sets the duration of these extended periods.
Time (minutes): 0 through 7 (0=no prolonging)
3 min
1.
Enter 214.
Display: DISA Prolng Time
2.
Press NEXT.
Display example: Time:3 min
3.
Enter the time.
To change the current entry, enter the new time.
4.
Press STORE.
5.
Press END.
• Do not confuse this parameter with the "CO-to-CO Call Duration
Time" (Program [206]) parameter.
• Program [206] "CO-to-CO Call Duration Time" is used to set the
duration time allowed for a CO-to-CO call.
• You cannot leave the entry empty.
Section 3, Features,
Direct Inward System Access (DISA)
Timer Programming
*: Available for KX-TD1232 only.