BRKT
WARNING
Never look into the tilt cylinder opening
because the free piston and power trim
and tilt fluid may be expelled out force-
fully.
5. Hold the tilt piston in a vise using the
special service tool 4 on both sides.
6. Remove the tilt ram.
PTT piston vice attachment 4:
YB-06572
Tilt rod wrench 5: YB-06569
7. Hold the cylinder block 6 in a vise using
aluminum plates a on both sides.
8. Loosen the trim cylinder end screws 7,
and then remove them.
7-33
Bracket unit
Trim and tilt cylinder wrench:
YB-06175-2B
9. Remove the trim piston assemblies.
10. Drain the power trim and tilt fluid.
11. Remove the circlip 8, adapter 9, and
spring 0 from the trim piston assem-
blies.
12. Hold the trim ram A in a vise using alu-
minum plates a on both sides.
13. Remove the trim piston B.
69J1D11