Increases By Approx - Toshiba e-STUDIO350 Service Handbook

Classifi-
Code
cation
340 Scanner Reproduction ratio adjust-
ment of secondary scan-
ning direction
(scanner section)
350 Scanner Shading posi-
tion adjust-
ment
351
354 RADF Adjustment of
RADF paper
alignment
355
357 RADF Fine adjustment of RADF
transport speed
358 RADF RADF sideways deviation
adjustment
359 Scanner Carriage position adjust-
ment during scanning from
RADF
365 RADF RADF lead-
ing edge posi-
tion
adjustment
366
401 Laser Fine adjustment of polygo-
nal motor rotation speed
(adjustment of primary
405
scanning direction repro-
duction ratio)
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Adjustment mode (05) <e-STUDIO352/353/452/453>
Func-
Items
tion
ALL
Original ALL
glass
RADF ALL
for single- ALL
sidedorigi-
nal
for double- ALL
sidedorigi-
nal
ALL
ALL
ALL
for single ALL
sided orig-
inal
for double ALL
sided orig-
inal
PRT
PPC
2 - 67
07/11
Default
<Accept-
RAM Contents
able
value>
128 SYS When the value
<0-255> increases by "1", the
reproduction ratio in
the secondary scan-
ning direction (vertical
to paper feeding direc-
tion) increases by
approx. 0.223%.
128 SYS 0.1369 mm/step
<118-
138>
128 SYS
<118-
138>
10 SYS When the value
<0-20> increases by "1", the
aligning amount

increases by approx.

10 SYS
0.5mm.
<0-20>
50 SYS When the value
<0-100> increases by "1", the
reproduction ratio of
the secondary scan-
ning direction when
using the RADF
increases by approx.
0.1%.
128 SYS When the value
<0-255> increases by "1", the
image of original fed
from the RADF shifts
toward the rear side of
paper by approx.
0.0846mm.
128 SYS When the value
<0-255> increases by "1", the
carriage position when
using the RADF shifts
by approx. 0.1 mm
toward the original
feeding side.
50 SYS When the value
<0-100> increases by "1", the
copied image of origi-
nal fed from the RADF
50 SYS
shifts toward the trailing
<0-100>
edge of paper by
approx. 0.1mm.
133 M When the value
<0-255> increases by "1", the
reproduction ratio of
129 M
primary scanning direc-
<0-255>
tion increases by
approx. 0.07%.
(approx. 0.1mm/step)
e-STUDIO350/352/353/450/452/453
ERROR CODE AND SELF-DIAGNOSTIC MODE
Pro-
cedur
e
1
2
1
1
1
1
1
1
1
1
1
1