NEC Electra Elite 48/192 Features And Specifications Manual page 511

Issue 6
S - 6
The LCD displays the name(s) starting with N. The user can then
scroll down to the applicable name and make a selection.
Dial Pad 0~9 is valid for searching. The following shows the relation
¥
between Dial Pad and Alphabet/Digit:
• Dial Pad 0 0
• Dial Pad 1 1
• Dial Pad 2 ABC2
• Dial Pad 3 DEF3
• Dial Pad 4 GHI4
• Dial Pad 5 JKL5
• Dial Pad 6 MNO6
• Dial Pad 7 PQRS7
• Dial Pad 8 TUV8
• Dial Pad 9 WXYZ9
When the system is programmed as Key Function, select a number
¥
in the display, and press an idle trunk line key to dial it.
When the user is viewing the directory to select the number to be
¥
dialed, an incoming call to that station is treated in the same way as
a call to a User Programming Mode station.
Scrolling mode is canceled when one of the following keys is
¥
pressed: Hold, Transfer, Answer, Redial, One-Touch, or Feature
Access.
Key operation is ignored when Conf or Recall is pressed during
¥
scrolling.
A maximum 12 characters are displayed in the Multiline Terminal
¥
LCD when the system is programmed for 1000 System Speed Dial
numbers.
A maximum 13 characters are displayed in the Multiline Terminal
¥
LCD for Station Speed Dial or when programmed for 100 System
Speed Dial numbers.
When the stored name/number exceeds 12 or 13 characters, only
¥
the first 12 or 13 characters are displayed in the Multiline Terminal
LCD.
Electra Elite
Scrolling Directories