NEC Electra Elite 48/192 Features And Specifications Manual page 109

Issue 6
SERVICE
CONDITIONS
B - 6
To Barge-in using an outside line key:
1. Lift the handset or press
T
2. Press
3. Press the CO/PBX line key to be interrupted.
4. Interrupt is enabled.
Data Assignment:
Multiline Terminals can be used to interrupt the privacy of
¥
conversations on outside lines.
Use Memory Block 1-1-76 (Barge-In Alert Tone Assignment) to allow
¥
(default: YS) or deny (NO) an alert tone during Barge-In.
Use Memory Block 1-8-08[Class of Service (Station) Feature
¥
Selection 2] Page 1 LK4 to Allow (LED On) or Deny (default: LED Off)
Barge-In Originate.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
¥
Selection 2] Page 1 LK5 to Allow (default: LED On) or Deny (LED Off)
Barge-In Receive.
Each Barge-In in progress uses a conference circuit.
¥
Restrictions:
Barge-In is not allowed for internal calls.
¥
Barge-In is not allowed until the Elapsed Call Time starts.
¥
Add-On Conference calls cannot be interrupted.
¥
The Barge-In feature is not permitted when 16 Add-On Conferences
¥
are in progress.
The Barge-In feature does not override conversation on a Private
¥
Line.
A Single Line Telephone user cannot activate Barge-In; however, the
¥
conversation on a Single Line Telephone can be interrupted.
The Barge-In feature cannot be used on outside lines for another
¥
tenant unless the lines are assigned to both tenants.
Data Line Security prevents a station from being barged in on, even
¥
when Barge-In is allowed in Class of Service.
Barge-In is not allowed on outside lines on Hold.
¥
P
, and wait for internal dial tone.
R
, then press .
Electra Elite
Barge-In