NEC Electra Elite 48/192 Features And Specifications Manual page 232

Electra Elite
Features and Specifications Manual
When a Multiline Terminal user completes Live Record without
¥
specifying a mailbox where the conversation should be stored and
Automatic Recall is not assigned in Digital Voice Mail programming,
the conversation is stored in the mailbox assigned to the Multiline
Terminal. When a Multiline Terminal user completes Live Record
without specifying a mailbox where the conversation should be
stored and Automatic Recall is assigned in Digital Voice Mail
programming, the conversation is stored in the mailbox assigned to
the Multiline Terminal and the system recalls the Multiline Terminal
and plays the recorded conversation.
(Auto Callback rings - 4 times, Waiting Time - 3 minute, Redial - 5
times.)
Live Record can be used only from Multiline Terminals.
¥
Individual trunks must be assigned for the Live Record feature to
¥
operate.
An alert tone is provided for Live Record. The alert tone is heard by
¥
both the outside party and the Multiline Terminal user when the
recording starts or at specified intervals during recording. The
interval between alert tones is assigned in the Digital Voice Mail
System Programming. The tone lasts for 0.5 seconds. The system
can also be programmed so that an alert tone is not provided.
Up to seven feature keys can be programmed for use with Live
¥
Record. These feature keys can be assigned to Feature Access
keys, One-Touch keys, or DSS keys (on a DSS/BLF console). When
the feature keys are assigned to One-Touch keys, no LED
indications are provided.
The following feature keys can be programmed:
¥
Record Key
Use this key to manually start Live Record. The associated LED
flashes red while recording. The associated LED goes off when
recording ends or a pause occurs and flashes green when a live
record message is addressed.
Pause Key
Use this key to pause and restart live record. The associated
LED flashes green when recording has paused.
Erase Key
Use this key to erase the Live Record conversations. After the
Erase key is pressed, the Voice Mail port remains off-hook until
the call is terminated.
End Key
Use this key to end the Live Record. The conversation can
continue without being recorded.
Issue 6
D - 23