NEC Electra Elite 48/192 Features And Specifications Manual page 296

Electra Elite
Features and Specifications Manual
To Hold a call in progress at the handset:
1. Press Trf.
2. An Internal Dial tone is generated.
3. To return to the held party press the flashing green line key.
Note: After a programmed time the held call recalls to the originating terminal.
To establish a conference call at the base unit:
1. With a call in progress, press
2. Dial another station number.
3. Announce Conference (Optional).
R
4. Press
To Install the battery:
1. Slide the battery compartment cover on the lower Handset back
down to remove it.
2. Remove the IMPORTANT charging NOTE from the battery
compartment.
3. Align the guides on the bottom of the battery plug and insert it in
the connector.
4. Put the battery in the compartment with the description visible.
5. Replace and push up the cover to snap it in place.
Note:Ensure that the wires are inside the cover.
To install the belt clip:
1. Position clip to the back side of the Handset unit with the clip
spring pointed up.
2. Align the four prongs of the clip to the four slots on the sides of
the Handset.
3. Gently press belt clip to snap the prongs into place.
R
on the Base unit to establish the conference.
on the Base unit.
Issue 6
D - 87