Epson MR Series Technical Reference Manual page 93

2. Insert the Driver CD-ROM for the IM-800 in the CD-ROM drive.
3. Start \Dos62\Network\100PDISK.EXE.
4. The dialog box to confirm copying the file is displayed. Click Yes.
5. The Setup Wizard starts, and the License Agreement dialog box is displayed. Select [I accept
the terms in the license agreement] and click Next.
6. The dialog box that specifies the place of the copy of the file is displayed. Input the place and
click Next. The default setting is C:\Intel_32.
7. When copying of the file is completed, the Release note is displayed.
Installing the network driver
Note
Different environments require different ways of setting the Network Driver. For the details of the
installation procedure, see the setting manual (HTML style) in the C:\Intel_32\Info\ directory in the file
extracted by the preceding procedure.
The following example describes the procedure to install the Netware DOS ODI Client Driver.
1. Copy all files in the C:\Intel_32\DOS\ directory in the file extracted by the preceding
procedure on the floppy disk.
2. Turn on the IM-800 to start MS-DOS.
3. Insert the floppy disk copied by step 1 in the FDD of the IM-800.
4. Copy all files in the floppy disk to the optional directory in the hard disk. For example, copy
it to the C:\NWCLIENT\ directory.
5. Add the following description to the CONFIG.SYS of the MS-DOS with a text editor, and
save it.
LASTDRIVE=Z
6. Edit the following description in C:\NWCLIENT\NET.CFG with a text editor, and save it.
The following is the example of the setting for the NET.CFG.
LINK DRIVER E100BODI
FRAME ETHERNET_802.2
SPEED=100
PROTOCOL IPX EO Ethernet_802.2
NETWARE DOS REQUESTER
FIRST NETWORK DRIVE = F
PB BUFFERS = 10
Rev. I
MR Series Technical Reference Manual
OS and Drivers 4-43