Epson MR Series Technical Reference Manual page 274

CAUTION:
Be careful not to drop the HDD when you remove it from the HDD bracket.
Be careful not to pinch the HDD cable when screwing.
7. Pull out the 2.5"HDD from the HDD bracket while lifting up the 2.5"HDD in the direction of
the arrow. Then disconnect the HDD cable and remove the 2.5"HDD.
2.5"HDD
HDD cable
CAUTION:
Be careful not to injure yourself on the sharp edges of the metal parts of the IM-800.
8. Remove two screws securing the 2HDD circuit board and remove the 2HDD circuit board.
9. When two HDDs are installed, remove the four screws shown in the figure below securing
the 2.5"HDD and remove the HDD.
9-58 Disassembly and Assembly
2HDD circuit board
2.5"HDD
2.5"HDD
2HDD plate
Rev. I