CAUTION:
To remove the touch panel position adjust jig, lift it up straight. Otherwise it may be
damaged.
Follow the steps below to attach the touch panel unit (115).
Removing the Touch Panel Unit
The first step is same to some steps (from 1 to 5) for removing the touch panel assembly(it is
indicated in the explainment above).
Note:
In the product made at first, a spacer is attched on LCD. When replacing the touch panel unit, remove the
spacer before attaching the touch panel unit.
spacer
6. Unit the position of the hole of the touch panel unit and front panel unit.
7. Fix the touch panel unit with 2 screws (S05) at the 2 holes (E,F). After that, attach it with 2
screws (S05) at the 2 holes (G,H). (Refer to the below figure.)
9-22 Disassembly and Assembly
LCD
Rev. I