5 - 10 RS507 Product Reference Guide
Picklist Mode
Parameter # F0h 92h
Picklist mode enables the Imager to decode only bar codes that are aligned under the laser crosshair. Select one
of the following picklist modes for the Imager:
•
Disabled Always - Picklist mode is always disabled.
•
Enabled Always - Picklist mode is always enabled.
NOTE For the DS9808-LR, if you configure Trigger B for Imager Decoding and enable Picklist Mode, activating
Trigger B turns on the imager aiming pattern, and releasing the trigger activates decoding.
*
Disabled Always
(00h)
Enabled Always
(02h)