Motorola RS507-IM2xxxxSTWR Product Reference Manual page 208

Establish SSI connection by scanning the SSI (SCAN) bar code to change the RS507 mode to SSI (SCAN)
3.
mode. The SSI (SCAN) mode allows the RS507 to communicate with the computer through SPP during the
firmware update session. The SSI (SCAN) bar code can also be scanned directly from a computer screen.
SSI (SCAN) bar code
Perform a Cold Boot by removing and re-installing the battery onto the RS507. The RS507 starts to operate
4.
under SSI mode using an SPP connection with the computer. Notice the COM port that was assigned to the
RS507.
On the computer, run the PC Tool application.
5.
PC Tool Application - Firmware Upgrade
Figure 7-50
NOTE When using older BT version, enter PIN code 12345.
Follow the instructions for
6.
SPP connection with RS507 as a Master on page 7-26
the RS507 is in SSI (SCAN) mode.
Once paired and connected to the computer, select BT COM port.
7.
RS507 Bluetooth Connection Using HID and SPP Profiles 7 - 39
SPP connection with RS507 as a Master on page 7-19
under Windows XP SP3 except, this time use it while
under Windows 7 SP1 or